INFINIX SMART 5 X657B RED STATE OR DM-VERITY ERROR

------------------------------------------
INFINIX SMART 5 X657B_QGo_EI 

MT6761 3G/64G
------------------------------------------

ERROR CASE:
- DM-VERITY ERROR
- RED STATE 

INGRIDIENT:
- Official Firmware [ X657B-H6117EI-QGo-OP-S2-211015V172 ]
- Flashtool_SWDv4.1901.23.17_for_AfterSales
- MTK_bypass_utility
- Compatible SP Flash Tool
	I use SP_Flash_Tool_v5.2044 version:
	  Build: 2020/11/03 22:13 (0x536568)
	  DA & Library info:
	  DA_v3.3001.2020-11-02020/11/03 23:48:24
		Build-Date: 2020/11/03 23:48:24
	  libflashtool.so vBROM_DLL_v7.2045.02
		[Official-Build](Release Version)
		Build-Date: 2020/11/03 23:48:24
	
WORKAROUND:
I. FLASH WITH Flashtool_SWDv4.1901.23.17_for_AfterSales (FIRMWARE_UPGRADE)
	- CONNECT TO PC WITH PRELOADER MODE
	- ALTHOUGH FAILED, NO PROBLEM
	- This step Produce BOOTLOOP

II. BYPASS MTK BROM
	
IIIA. Flash with SP_Flash_Tool_v5.2044:
	- Options > Options:
		- General > Uncheck "Check LIB DA match" and "Storage life Cycle"
		- Connection > UART > Select "COM port" and "Baud rate to 921600"
		- Choose Default DA (MTK_AllInOne_DA.bin)
	- Choose the firmware scatter File "MT6761_Android_scatter.txt"
	- Select "Download Only"
	- Uncheck:
    

		- TKV
		- TRANFS
		- Preloader (Optional depends on ur device and firmware)
	
IIIB. FLASH WITH UFI software version: 1.6.0.2202
	- Navigate to Infinix > Mediatek  X622 (or Find ur way)
	- Load the firmware scatter File "MT6761_Android_scatter.txt"
	- Thick or not (TKV, TRANFS, or Preloader

done

EMMC REPLACE REDMI NOTE 5 WHYRED [CASE ON MEE7S] 4G/64G

Bismillah 

Pre-condition

- eMMC with rpmb not programmed yet

Ingridient:

- patched firehose for whyred

- Special file for Whyred instant UBL

- Special Firmware v9.5.19_OEICN (cooked)

- Special Firmware v8.8.2_OEIMI Global Beta (Cooked)

- QCN FILE

- Special Free Mi Unlock Tool

Steps:

1. Flash it with Special Firmware v9.5.19_OEICN (cooked)

- please UNCHECK backup_gpt

2. Stuck Logo, No recovery, Yes Fastboot but not detected on PC

3. Flash from Special file for whyred instant UBL

- if wanna, flash only devcfg and devcfgbak

4. Unlock with Free Mi Unlock Tool

5. Enable USB Debugging and Switch Diag mode ON

5. Write IMEI and QCN. 

    - Use QCN file appropriate with baseband version

6. Restat, then Calibrate with *#*#6484#*#*

7. Check Dual-SIM & dual-4G Networking

8. Flash it with Special Firmware v8.8.2_OEIMI Global Beta (Cooked)

- UNCHECK devcfg and devcfgbak before flash

        - Don't forget to Wipe data via recovery

10.  Insya Allah the device is work normally.

Additional Optional Steps:

    *. Update OTA to 9.3.14_OEIMI Global Beta

            - This step produces stuck-mi-logo

    **. Flash only devcfg & devcfgbak from Special file for whyred instant UBL

            - It will resolve the stuck-mi-logo problem

Alhamdulillahi Robbil 'Alamiiiin

How to Change Network Connection Profile Private To Public and Vise-Versa on Windows

•  Open Powershell as Admin
•  Type and Enter this command to see the connection profile wheter private or public or others

             Get-NetConnectionProfile

• Type and enter like this command below to set the net connection profile wheter private or public or others

            Set-NetConnectionProfile -Name "Unidentified network" -NetworkCategory Private

    This is test-case on Windows 10 Pro